Marley Engineered Products A User Manual download pdf

“K” Series

(Model A)

Fan Forced

Wall Heaters

Read Carefully - These instructions are written to help you

prevent difficulties that might arise during installation of

heaters. Studying the instructions first may save you consid-

erable time and money later. Observe the following proce-

dures and cut your installation time to a minimum.

To reduce risk of fire or electric shock:

1. To prevent electrical shock, disconnect all power coming

to heater at main service panel before wiring or servicing.

2. All wiring must be in accordance with the National and

Local Electrical Codes and the heater must be grounded

as a precaution against possible electric shock.

3. Verify the power supply voltage coming to heater match-

es the ratings printed on the heater nameplate before

energizing.

4. This heater is hot when in use. To avoid burns, do not let

bare skin touch hot surfaces.

5. Do not insert or allow foreign objects to enter any ventila-

tion or exhaust opening as this may cause an electric

shock, fire, or damage to the heater.

6. To prevent a possible fire, do not block air intakes or

exhaust in any manner. Keep combustible materials, such

as crates, drapes, etc., away from heater. Do not install

behind doors, furniture, towels, or boxes.

7. A heater has hot and arcing (sparking) parts inside. Do

not use it in areas where gasoline, paint, or flammable

liquids are used or stored.

8. Use this heater only as described in this manual. Any

other use not recommended by the manufacturer may

cause fire, electric shock, or injury to persons.

9. This heater is not approved for use in corrosive atmos-

pheres such as marine, green house, or chemical storage

areas.

WARNING

SAVE THESE INSTRUCTIONS

(

400mm)

15-3/4"

(485mm)

19-1/8"

(35mm)

-3/8"

(95mm)

-3/4"

(463mm)

18-1/4"

Dear Owner,

Congratulations! Thank you for purchasing this new heater manufactured by Marley Engineered

Products. You have made a wise investment selecting the highest quality product in the heating indus-

try. Please carefully read the installation and maintenance directions shown in this manual. You should

enjoy years of efficient heating comfort with this product from Marley Engineered Products... the indus-

try’s leader in design, manufacturing, quality and service.

... The Employees of

Marley Engineered Products

Installation & Maintenance Instructions

FILE #E21609

1 2 3 4 5

Summary of Contents

Page 1 - Wall Heaters

“K” Series(Model A)Fan ForcedWall HeatersRead Carefully - These instructions are written to help youprevent difficulties that might arise during insta

Page 2 - IMPORTANT

Installation of Recessed Back Boxin New Construction1. Mounting Back Box (See Figure 1).a. Place the back box between two 16" (406mm)center-to-ce

Page 3

Installation of Back Box With OptionalSurface-Mounting Frame (See Figure 3).1. Secure back box to wall (with knockouts in upper righthand corner) usin

Page 4 - K404A DATE CODE: 0595

Operation1. Turn power to heater on at main switch panel. Rotate thethermostat knob fully clockwise. This should energize theheating elements and the

Page 5 - LIMITED WARRANTY

LIMITED WARRANTYAll products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from d