Marley Engineered Products A User Manual download pdf

Electric Baseboard

Heaters

2500 & C2500 Series

WARNING

Instal l ation, Operation & Mainte nance Instructions

Dear Owner,

Congratulations! Thank you for purchasing this new heater manufactured by Marley Engineered Products.

You have made a wise investment selecting the highest quality product in the heating industry. Please care-

fully read the installation and maintenance instructions shown in this manual. You should enjoy years of

efficient heating comfort with this product from Marley Engineered Products... the industry’s leader in de-

sign, manufacturing, quality and service.

... The Employees of

Marley Engineered Products

Read Carefully - This Instruction Sheet contains vital in-

formation for the proper installation, use, and efficient oper-

ation of the heater. Carefully read the manual before

installation, operation, or cleaning of the heater. Failure to

adhere to the instructions could result in fire, electric shock,

death, serious personal injury, or property damage. Save

these instructions and review frequently for continuing safe

operation and instructing future users.

CAUTION - TO REDUCE RISK OF FIRE AND ELECTRIC

SHOCK OR INJURY TO PERSONS, OBSERVE THE

FOLLOWING:

1. Keep all electrical cords, foam filled articles, drapes,

bedding, and other household furnishings away from

contact with heater. It is recommended all items be kept

a minimum of six (6") inches (152mm) from heater.

2. Do not install baseboard heater below electrical con-

venience receptacles (outlets).

3. Do not install upside down or in any position other than

as shown in this manual.

4. Do not install baseboard heater against vinyl wallpaper,

paperboard or low density fiberboard surface. Do not

install vinyl drapes or vinyl blinds above heater.

5. Do not recess heater in wall.

6. The installation must comply with applicable Local and

National Electrical Codes and utility requirements.

7. Do not remove or by-pass the safety limit (see Figure 4).

8. To reduce the risk of fire, do not store or use gasoline or

other flammable vapors and liquids in the vicinity of the

heater.

9. Personal injury or death could result from electric shock.

Disconnect all power to heater at main panel before

attempting to install or service this heater.

10. Supply voltage must be the same as heater voltage.

Check heater nameplate and supply voltage before

energizing.

11. When using RSA Transformer Relay Accessory, supply

wiring must be suitable for 90°C.

File #E37116

1 2 3 4

Summary of Contents

Page 1 - Electric Baseboard

Electric BaseboardHeaters2500 & C2500 SeriesWARNINGInstal l ation, Operation & Mainte nance InstructionsDear Owner,Congratulations! Thank you

Page 2 - NAMEPLATE

GENERALThis heater is designed to provide years of efficient, trouble freeoperation as a primary or supplementary heat source for comfortheating in re

Page 3 - PAINTING

2. Drill hole in wall (or floor) at desired location for power supplyentry. Install power supply wiring to heater and thermostat lo-cation as determin

Page 4 - LIMITED WARRANTY

L1L1L2L2GROUNDGROUNDWHITE OR BLACKELEMENTESAFETYLIMITLELEMENTL1L1L1L2L2L2GROUNDGRND FACTORY WIRINGFIELD WIRINGWHITE OR BLACKSAFETYLIMITEL1 L2GL1L1L2L2