Marley-engineered-products PATTON GV 16 User Manual download pdf

BLADE MAX MIN. INTAKE

CFM VOLTS WATTS AMPS HP RPM DIA. SHUTTER ATTIC AREA REQUIRED

*1520 120 255 2.6 1/5 1100 16” STD. WOOD 2170 5.1 Sq. Ft.

LOUVER Sq. Ft.

1860 120 250 2.6 1/5 1115 16” METAL 2656 6.2 Sq. Ft.

LOUVER Sq. Ft.

READ AND SAVE THESE INSTRUCTIONS

MODEL GV 16

GABLE MOUNTED

VENTILATOR

READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THE

PATTON ATTIC VENTILATOR. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSON-

AL INJURY AND/OR PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

TO REDUCE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY

TO PERSONS, OBSERVE THE FOLLOWING:

Description

The Marley Engineered Products gable mounted attic ventilator is

fully automatic and designed for general ventilating use only in the

attic spaces of houses, apartments and other small buildings. Unit

can be installed behind existing attic louvers to exhaust hot air or

pull in cool air. An accessory dehumidistat can be used with this

unit to automatically activate in the winter to help eliminate exces-

sive moisture.

The ventilator comes complete with mounting brackets, 18”

armored flexible cable, prewired automatic thermostat mounted in

junction box, thermally protected motor, and heavy gauge plated

steel housing.

Unpacking

Unpack carefully. Inspect for loose, missing or damaged parts. In

the event of missing components or hidden damage, immediately

contact your distributor or the delivering carrier concerning dis-

crepancies. The motor/fan assembly has been carefully factory-

balanced. Care should be taken when handling to avoid damage

resulting in unnecessary vibration and noise.

Specifications

MOTOR

* H.V.I. Certified at 0.03” Static Pressure

Figure 2

— Dimensions

1. Do not use this fan with any Solid-State Speed Control Device.

2. Use this unit only in the manner intended by the manufacturer. If you

have questions, contact the manufacturer.

3. Before servicing or cleaning unit, switch power off at service panel and

lock service panel to prevent power from being switched on accidentally.

4. Installation work and electrical wiring must be done by qualified per-

son(s) in accordance with all applicable codes and standards, including

fire-rated construction.

5. Sufficient air is needed for proper combustion and exhausting of gases

through the flue (chimney) of fuel burning equipment to prevent back

drafting. Follow the heating equipment manufacturer’s guideline and

safety standards such as those published by the National Fire Protection

Association (NFPA), and the American Society for Heating and Air

Conditioning Engineers (ASHRAE), and the local code authorities.

Dimensions 7”

⁄16”

⁄8”

1 2 3 4

MODEL GV 16 1
PARTS LIST 4

Summary of Contents

Page 1 - MODEL GV 16

BLADE MAX MIN. INTAKECFM VOLTS WATTS AMPS HP RPM DIA. SHUTTER ATTIC AREA REQUIRED*1520 120 255 2.6 1/5 1100 16” STD. WOOD 2170 5.1 Sq. Ft.LOUVER Sq. F

Page 2

UNRESTRICTED WOOD LOUVER METAL LOUVER5.1 Sq. Ft. 6.4 Sq. Ft. 5.9 Sq. Ft.6. “When cutting or drilling into wall or ceiling, Do Not damageelectrical wir

Page 3

Excessive 1. Propeller blade contacting 1. Realign or replace.noise. housing.2. Foreign material inside 2. Clean.housing.3. Motor loose. 3. Secure pro

Page 4 - PARTS LIST

Part No. 5200-2550-000 PPD 0353-00PARTS LISTREF. NO. DESCRIPTION QTY.1 FAN BLADE ASSEMBLY 12 SHROUD ASSEMBLY 13 + SHROUD 14 + POP RIVET, 1/8 X 1/8 STE

Comments to this Manuals

No comments

Marley-engineered-products PATTON GV 16 User Manual

Browse online or download User Manual for Fans Marley-engineered-products PATTON GV 16. Marley Engineered Products PATTON GV 16 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Fans Marley-engineered-products PATTON GV 16