Marley Engineered Products G Series Technical Information download pdf (Page 4)

IMPORTANT INFORMATION

HOW TO ORDER REPAIR PARTS

In order to obtain any needed repair or replacement

parts, warranty service or technical information, please

contact Marley Engineered Products Service Center toll-

free by calling 1-800-642-HEAT.

When ordering repair parts, always give the informa-

tion listed as follows:

1. The Model Number

2. The Part Description

3. Date of Manufacture

LIMITED WARRANTY

All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of instal-

lation, except heating elements which are warranted against defects in workmanship and materials for five years from date of installation. This war-

ranty does not apply to damage from accident, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage;

nor to equipment improperly installed or wired or maintained in violation of the product’s installation instructions. All claims for warranty work must be

accompanied by proof of the date of installation.

The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred

to return products to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the

nearest Marley authorized service center or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge

to you with return freight paid by Marley. It is agreed that such repair or replacement is the exclusive remedy available from Marley Engineered

Products.

THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY

DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL

DAMAGES ARISING WITH RESPECT TO THE PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise

returned to the factory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products.

When requesting return authorization, include all catalog numbers shown on the products.

01/02

MODEL NO.

G2224IF DATE CODE 1198

FAN FORCED WALL HEATER

TYPE

CALEFACTOR DE PARED CON GO1

VENTILADOR

APPAREIL MURAL À AIR PULSE

240/208 2250/1688 9.4/8.1

VOLTS AC WATTS AMPS

60 HZ

MARLEY ENGINEERED PRODUCTS

BENNETTSVILLE, SC 29512 4104-2214-010

774G LISTED

ROOM HEATER

Part No. 5200-2385-007

ECR 35050

MAINTENANCE

TO CLEAN HEATER: The heater should be cleaned at least annually

for maximum efficiency or more often if used in dirty environment.

Before cleaning be sure power is off and heater is cool. First, remove

knob by pulling straight out, then remove front grille and clean blower

wheel using a vacuum cleaner with a brush attachment. The grille may

be cleaned with a slightly damp rag if desired.

OPERATIONAL NOTICE – RED WARNING LIGHT

Your heater is equipped with an automatic reset limit control that will

automatically turn the heater OFF to prevent overheating. Should this

occur, the red warning light will illuminate and will continue to shine until

the limit resets. Your heater is also equipped with a backup “one shot”

thermal protection fuse that will permanently disable the unit, to prevent

a fire, if the reset limit fails. If the red warning light illuminates and the

heater never restarts, the “one shot” thermal protection fuse has been

activated and you should consult the factory.

THE ILLUMINATED RED WARNING LIGHT SIGNIFIES THE HEATER HAS

BEEN SUBJECTED TO SOME ABNORMAL CONDITION CAUSING IT TO

OVERHEAT. CHECK HEATER TO INSURE THAT IT HAS NOT BEEN

BLOCKED IN ANY MANNER (IF SO, REMOVE BLOCKAGE). IF THERE IS

NO INDICATION OF BLOCKAGE IT IS RECOMMENDED THE HEATER BE

CHECKED BY A REPUTABLE ELECTRICIAN OR REPAIR SERVICE TO

INSURE THE HEATER HAS NOTBEEN DAMAGED. DO NOTCONTINUE TO

USE HEATER IF LIGHT IS ON.

CAUTION

NAMEPLATE

USE ONLY WITH RBB SERIES

BACK BOX. DO NOT OPERATE

WITHOUT GRILLE IN PLACE.

SÓLO DEBE USARSE CON LA

CAJA POSTERIOR RBB. NO

DEBE ENCENDERSE SIN LA

FEJILLA.

UTILISER SEULEMENT AVEC

UN BOÎTIER ARRIÉRE RBB.

NE PAS UTILISER SI LA

GRILLE N’EST PAS EN

PLACE.

NAMEPLATE

TO REDUCE RISK OF FIRE AND ELECTRIC SHOCK, DISCONNECT

ALL POWER COMING TO HEATER AT MAIN SERVICE PANEL

BEFORE SERVICING OR PERFORMING MAINTENANCE.

CAUTION

EXAMPLE

SPX Corporation

470 Beauty Spot Rd. East

Bennettsville, SC 29512 USA

1 2 3 4

Comments to this Manuals

No comments

Marley Engineered Products G Series Technical Information Page 4

Comments to this Manuals

Related products and manuals for Space heaters Marley Engineered Products G Series