Marley Engineered Products G Series Specifications download pdf (Page 1)

WH Series

Fan Forced

Wall Heaters

Dear Owner,

Congratulations! Thank you for purchasing this new heater manufactured by Marley Engineered

Products. You have made a wise investment selecting the highest quality product in the heating indus-

try. Please carefully read the installation and maintenance directions shown in this manual. You should

enjoy years of efficient heating comfort with this heater from Marley Engineered Products... the indus-

try’s leader in design, manufacturing, quality and service.

... The Employees of

Marley Engineered Products

Installation & Maintenance Instructions

Read Carefully - These instructions are written to help

you prevent difficulties that might arise during installation

of heaters. Studying the instructions first may save you

considerable time and money later. Observe the following

procedures, and cut your installation time to a minimum.

TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK:

1. Disconnect all power coming to heater at main service panel

before wiring or servicing.

2. All wiring must be in accordance with the National and Local

Electrical Codes and the heater must be grounded.

3. Verify the power supply voltage coming to heater matches the

ratings printed on the heater nameplate before energizing.

4. This heater is hot when in use. To avoid burns, do not let bare

skin touch hot surfaces.

5. Do not insert or allow foreign objects to enter any ventilation

or exhaust opening as this may cause an electric shock,

fire,or damage to the heater.

6. Do not block air intakes or exhaust in any manner. Keep

combustible materials, such as crates, drapes, etc., away

from heater. Do not install behind doors, furniture, towels,

or boxes.

7. A heater has hot and arcing or sparking parts inside. Do not

use it in areas where gasoline, paint, or flammable liquids are

stored.

8. Use this heater only as described in this manual. Any other

use not recommended by the manufacturer may cause fire,

electric shock, or injury to persons.

9. This heater is not approved for use in corrosive atmospheres

such as marine, green house, or chemical storage areas.

SAVE THESE INSTRUCTIONS

WARNING

2" (50.8mm)

1-5/16" (33mm)

1-21/32"

(42mm)

5/14"

(133mm)

Knockout

14-3/8"

(365mm)

19-3/16"

(487mm)

18-1/4"

464mm

15-21/64"

(389mm)

File E21609

1 2 3 4 5

Summary of Contents

Page 1 - Wall Heaters

WH SeriesFan Forced Wall HeatersDear Owner,Congratulations! Thank you for purchasing this new heater manufactured by Marley EngineeredProducts. You

Page 2 - Installation of Recessed Back

Installation of Recessed BackBox in New Construction1.Mounting Back Box (See Figure 1).a. Place the back box between two 16" (406 mm) center-to-

Page 3 - Cleaning & Maintenance

Note to Installer: Converting heater to half wattage(Not applicable to WH3150 and WH3180, 120 Volt Models)The WH Series wall heaters are manufactured

Page 4 - NAMEPLATE

TO RESET MANUAL RESET LIMIT:Your heater is equipped with a manual reset safety thermal limit controlthat will automatically turn the heater off to pre

Page 5 - Replacement Parts

KeyNo. Description Part Number1 Grille Assembly : White 2501-2003-004Standard 2501-2003-0072 Element, Single Phase:208V; 4000W 302015807208/240V; 300

Marley Engineered Products G Series Specifications Page 1

Browse online or download Specifications for Space heaters Marley Engineered Products G Series. Marley Engineered Products G Series Specifications User Manual

Summary of Contents

More documents for Space heaters Marley Engineered Products G Series

Comments to this Manuals

Marley Engineered Products G Series Specifications Page 1

Browse online or download Specifications for Space heaters Marley Engineered Products G Series. Marley Engineered Products G Series Specifications User Manual

Summary of Contents

More documents for Space heaters Marley Engineered Products G Series

Comments to this Manuals

Related products and manuals for Space heaters Marley Engineered Products G Series